Click to Enlarge
24” wide 3-roll Offset Gravure Lab Coater with Special
additional Top Wiper Blade (Wiper Blades "Disengaged")
14
Click to Enlarge
24” wide 3-roll Offset Gravure Lab Coater with Special
additional Top Wiper Blade (Wiper Blades "Disengaged")
15
Click to Enlarge
Remove Screws from Spacer Blocks and Slide Spacer Blocks away from Coating Pan
16
Click to Enlarge
Remove Screws from Spacer Blocks and Slide Spacer Blocks away from Coating Pan
17
Click to Enlarge
Remove Spacer Blocks and Simply Slide Coating Pan from Underneath Bottom Roll
18
Click to Enlarge
Remove Spacer Blocks and Simply Slide Coating Pan from Underneath Bottom Roll
19
Click to Enlarge
3-roll Offset Gravure Lab Coater: Contains
2 Wiper Blades against bottom gravure roll (mounted
in-line onto customer’s existing coating line)
20
Click to Enlarge
3-roll Offset Gravure Lab Coater: Contains
2 Wiper Blades against bottom gravure roll (mounted
in-line onto customer’s existing coating line)
21
Click to Enlarge
3-roll Offset Gravure Lab Coater: Contains
2 Wiper Blades against bottom gravure roll (mounted
in-line onto customer’s existing coating line)
22
Click to Enlarge
3-roll Offset Gravure Lab Coater: Contains
2 Wiper Blades against bottom gravure roll (close up
of motor controllers on control panel)
23
Click to Enlarge
3-roll Offset Gravure Lab Coater: Contains
2 Wiper Blades against bottom gravure roll (mounted
in-line onto customer’s existing coating line)
24
Click to Enlarge
3-roll Offset Gravure Lab Coater: Contains
2 Wiper Blades against bottom gravure roll (mounted
in-line onto customer’s existing coating line)
25
Click to Enlarge
Special 8” wide 3-roll Offset Gravure Lab Coater mounted in-line with customer’s existing coating line (“Right” side
wiper blade “engaged” for use in “Offset” gravure mode)
26
Click to Enlarge
Special 8” wide 3-roll Offset Gravure Lab Coater mounted in-line with customer’s existing coating line (“Right” side
wiper blade “engaged” for use in “Offset” gravure mode)
27
Click to Enlarge
Special 8” wide 3-roll Offset Gravure Lab Coater mounted in-line with customer’s existing coating line (“Right” side
wiper blade “disengaged” from bottom gravure roll)
28
Click to Enlarge
Special 8” wide 3-roll Offset Gravure Lab Coater mounted in-line with customer’s existing coating line (“Right” side
wiper blade “disengaged” from bottom gravure roll)
29
Click to Enlarge
Special 8” wide 3-roll Offset Gravure Lab Coater mounted in-line with customer’s existing coating line (“Left” side
wiper blade “engaged”
for use in “Direct” gravure mode)
30
Click to Enlarge
Special 8” wide 3-roll Offset Gravure Lab Coater mounted in-line with customer’s existing coating line (“Left” side
wiper blade “engaged”
for use in “Direct” gravure mode)
31
Click to Enlarge
Special 8” wide 3-roll Offset Gravure Lab Coater mounted in-line with customer’s existing coating line (“Left” side
wiper blade “engaged”
for use in “Direct” gravure mode)
32
Click to Enlarge
Special 8” wide 3-roll Offset Gravure Lab Coater mounted in-line with customer’s existing coating line (“Left” side
wiper blade “engaged”
for use in “Direct” gravure mode)
33
Click to Enlarge
Special 8” wide 3-roll Offset Gravure Lab Coater mounted in-line with customer’s existing coating line (“Left” side
wiper blade “disengaged” from bottom gravure roll)
34
Click to Enlarge
Special 8” wide 3-roll Offset Gravure Lab Coater mounted in-line with customer’s existing coating line (“Left” side
wiper blade “disengaged” from bottom gravure roll)
35
Click to Enlarge
3-roll Offset Gravure Lab Coater: Special
vertical adjustment for setting precise gap between "Top Chrome
Roll" and "Center Rubber Roll"
36
Click to Enlarge
3-roll Offset Gravure Lab Coater: Special
vertical adjustment for setting precise gap between "Top Chrome
Roll" and "Center Rubber Roll"
37
Click to Enlarge
3-roll Offset Gravure Lab Coater: Special
"Removable" feature for quick-change of the "Center Rubber Roll"
38
Click to Enlarge
3-roll Offset Gravure Lab Coater: Special
"Removable" feature for quick-change of the "Center Rubber Roll"
39
Click to Enlarge
Coating Pan contains “inlet” and “outlet” holes for attaching incoming and outgoing lines if desired for filling, draining, and/or re-circulating coating into pan.
